|
Back to
Lead Melting Equipment Index
| Back to Catalogue Main Index
ELECTRIC
LEAD MELTERS - 220 Volt Models
The
electric melters listed on this page are all 220 Volt models. Order these models
only if you require a 220 volt melter.
LEE PRECISION MELTER
LEE PRECISION A
good little furnace holding 4 lbs. (2 Kg) of lead. Melting time is about 15
minutes. Suitable for use with jig molds, and smaller sizes of sinker molds and
all bullet molds. Use with the 2 oz. capacity Lee
ladle. 500 watts, 220
volt AC, adjustable heat control, and guaranteed by the Manufacturer for two
years.
| Item
Code |
Price |
| 75-61-37 |
$43.99 |
LEE PRODUCTION
POT IV
LEE PRODUCTION POT IV
This electric furnace
is an affordable bottom pouring unit. It has a 10lb (4.5 Kg) lead capacity. This
model features four inches of clearance under the spout. It is a very good unit
for making jigs weighing less than ½ oz (16g) and can be used to mold sinkers
up to one ounce. It features are 500 watts, 220 volt AC, adjustable heat
control, and guaranteed by the Manufacturer for two years.
| Item
Code |
Price |
| 75-61-38 |
$70.99 |
LEE PRODUCTION PRO 4-20
click to enlarge
LEE PRODUCTION PRO 4-20
Large diameter high capacity pot,
holds approximately 20 pounds (9 Kg) of lead. This second generation design
incorporates the famous Lee patented high-efficiency design and dependable
remote sensing thermostat, now in a dust tight housing. Long life 700-watt
tubular heating element assures quick melting and rapid recovery. It features, a
new micro adjustable flow control valve which adjusts instantly with a twist of
a screw and an adjustable mold guide. The
flow valve can be adjusted to pour sinkers up to two and three ounces (84g) without wrinkles.
Front mounted low maintenance
replaceable valve spout allows instant resetting with a turn of a screwdriver.
220 volt AC, adjustable heat control, and guaranteed by the
Manufacturer for two years.
| Item
Code |
Price |
| 75-61-39 |
$94.99 |
|
