|
Back to
Lead Melting Equipment Index
| Back to Catalogue Main Index
ELECTRIC
LEAD MELTERS - USA Models
The
electric melters listed on this page are for sale only in the USA. These are
stock melters manufactured by Lee Precision. Residents of Canada can not order
any of the melters shown on this page.
LEE PRECISION MELTER
LEE PRECISION A
good little furnace holding 4 lbs. (2 Kg) of lead. Melting time is about 15
minutes. Suitable for use with jig molds, and smaller sizes of sinker molds and
all bullet molds. Use with the 2 oz. capacity Lee
ladle. 500 watts, 110
volt AC, adjustable heat control, and guaranteed by the Manufacturer for two
years.
| Item
Code |
Price |
| 75-61-31 |
$37.99 |
LEE PRODUCTION
POT IV
LEE PRODUCTION POT IV
This electric furnace
is an affordable bottom pouring unit. It has a 10lb (4.5 Kg) lead capacity. This
model features four inches of clearance under the spout. It is a very good unit
for making jigs weighing less than ½ oz (16g) and can be used to mold sinkers
up to one ounce. It features are 500 watts, 110 volt AC, adjustable heat
control, and guaranteed by the Manufacturer for two years.
| Item
Code |
Price |
| 75-61-32 |
$65.99 |
LEE PRODUCTION PRO 4-20
click to enlarge
LEE PRODUCTION PRO 4-20
Large diameter high capacity pot,
holds approximately 20 pounds (9 Kg) of lead. This second generation design
incorporates the famous Lee patented high-efficiency design and dependable
remote sensing thermostat, now in a dust tight housing. Long life 700-watt
tubular heating element assures quick melting and rapid recovery. It features, a
new micro adjustable flow control valve which adjusts instantly with a twist of
a screw and an adjustable mold guide. The
flow valve can be adjusted to pour sinkers up to two and three ounces (84g) without wrinkles.
Front mounted low maintenance
replaceable valve spout allows instant resetting with a turn of a screwdriver. 110 volt AC, adjustable heat control, and guaranteed by the
Manufacturer for two years.
| Item
Code |
Price |
| 75-61-33 |
$89.99 |
LEE MAGNUM MELTER
LEE MAGNUM MELTER Ladle
pouring can be faster and better than bottom pouring for sinker molds and many
larger jig and lure molds. At last there is an economical high capacity dip out
melter available! The large 20 (9 Kg) pound capacity MAGNUM MELTER is a
convenient way to melt lead for ladle pouring. It utilizes the the proven Lee
high-efficiency design to raise lead to temperature in about 20 minutes from a
cold start, holds approximately 20 pounds (9 Kg) of lead. This second generation design
incorporates the famous Lee patented high-efficiency design and dependable
remote sensing thermostat, now in a dust tight housing. Long life 700-watt
tubular heating element assures quick melting and rapid recovery. The 4" x
4" I.D. carbon steel pot is large enough to work well with the large 1½
lb. capacity Cast
Iron Ladle. 110 volt AC, adjustable heat control, and guaranteed by the
Manufacturer for two years.
| Item
Code |
Price |
| 75-61-34 |
$69.99 |
|
