|
Back to Lure
Paints Index | Back to Catalogue Main Index
WATER BASED CRYSTAL CLEAR COAT
SEALER
|
waterbase-image.gif |
Our best, high gloss, crystal clear
coat for use on metal, wood and plastic
body baits.
Real Pro's Water Based Crystal Clear Coat is a high performance
crystal clear coat formulated with a new water based anti-oxidant to protect brass and copper spoons
and blades from tarnishing in both fresh and salt water. It is also used
as a finishing top clear coat on wood and plastic body baits. Also works
well as a clear coat on painted jig heads. We have a number of customers
also this clear coat using it as a water based head cement with excellent
results.
- Apply on your wood and plastic body
baits to give them a deep high gloss finish that will
withstand chipping and extend the life of your lures.
- You may also apply our Crystal Clear Coat on your painted blades to prevent chipping.
- Our Crystal Clear Coat provides a tough, high gloss final coat on all of your lures.
- Virtually ordourless and easy water
clean-up.
|
| Item
Code |
Colour |
Size |
Price |
5+ |
10+ |
| 80-80-11 |
Crystal
Clear |
1
oz. |
$2.99 |
$2.79
ea |
$2.49
ea |
| 80-80-41 |
Crystal
Clear |
946ml |
$34.99 |
- |
- |
APPLY ON
- Plastic Body Baits
- Polished Brass Spoons and Blades
- Polished Copper Blades
- Wood Body Baits
- Painted Jigs
- Painted Spinner Blades
- As a water based head cement
SPECIAL
FEATURES
- You may add metal
flake glitter while stirring to create special effects.
- Dries to a hard, crystal clear high gloss finish.
- No thinning required when used with an
airbrush - 40 - 50 psi recommended.
INSTRUCTIONS:
Stir well before use. Do Not Shake. You may thin with water, but this is usually not
required even when using an air
brush. You
may apply by dipping, brushing or spraying. Goes on white but quickly turns
crystal clear. Always allow solvent based painted lures to cure for 3 of 4 days before applying our water based Crystal Clear Coat Sealer. Lures
painted with water based paints may be clear coated same day. Allow 4 to 5 days
to cure to a super hard crystal clear finish.
Dip: One or two coats is recommended for
brass or copper spoons and spinner blades and two or more coats is recommended for
plastic and wood body baits. Hang parts and allow to dry for 20 minutes to one
hour between each coat. Use a paper towel to absorb droplets of clear coat
forming on the bottom of parts. Allow all solvent based painted lures to cure for at
3 of 4 days before applying our water based Crystal Clear Coat Sealer.
Air Brush: You may thin with water, but this is usually not
required. Set air pressure to 40 to 50 psi. Apply a very very thin first coat -
allow to dry for 10 to 15 minutes. Apply a second thin coat and again allow to
dry for 10 to 15 minutes. Apply third and final coat and allow to dry for 1 to 2
hours before handling. Allow all solvent based painted lures to cure for 3 of 4 days before applying our water based Crystal Clear Coat Sealer.
Brushing: Use a synthetic brush and
apply one to three coats. Allow to dry for 20 minutes to one hour between coats. Allow all solvent based painted lures to cure for at
3 of 4 days before applying our water based Crystal Clear Coat Sealer.
Adding Metal Flake Glitter : To
create new and exciting finishes you may add metal
flake to our water based clear coat. Add Metal
Flake by measuring an amount of metal flake equal to approximately 10% (by
volume) of the clear coat you wish to add the metal flake to. Add metal flake
slowly and while stirring.
Lures
painted with water based paints may be clear coated same day. Allow 4 to 5 days
to cure to a super hard crystal clear finish. Use in a well ventilated area.
There are no shipping restrictions on
water base clear coat.
|
